SoilPump Controllers
Pump Controller 701
Pump Controller 701 is a compact unit for level control of 1 pump and 1 alarm or for 2 pumps in alternating service.
Pump Controller 701 is supplied either complete with sensor and cable bracket or as a separate unit.
A suitable sensor is MJK Pressure Transmitters type 7060 or 7070.
Pump Controller 704
The 704 Pump Controller can be used to control up to 4 pumps or valves between adjustable levels.Functions for control, alarm, indication and flow calculation are selectable. The MJK 704 Pump / Level Controller is delivered with either an ultrasonic sensor or a hydrostatic transmitter.
The Level Controller is supplied with data communication capabilities so that it can be connected to a SCADA System.
Pump Controller 712
ConTroller 712 is a compact unit for control of 2 pumps or valves with optional alternation and also an alarm output.
ConTroller 712 can control 1 or 2 pumps by means of level electrodes and a timer. The pumps is started when the level reaches the start electrode, and is stopped either when the level goes below the stop electrode or after runout of a timer.
ConTroller 712 has 3 output relays; 2 for control of pumps and 1 for alarm. A total of 5 level electrodes can be connected to ConTroller 712.
ConTroller 712 can be connected to a GSM or GPRS modem for transmission of service data and alarms to the SCADA system. Communication of all data takes place utilizing a standard Comli PLC protocol, which will ensure adaptation to the most common SCADA systems.