SoilSoil Water Analysis
Turbidimeter PCcompact
The PCcompact is designed as a compact, easy to use instrument to determine turbidity fast and accurate. A light emitting diode (LED) is used as a light source with a photodetector positioned to detect light scattered by a sample at 90° to the incident beam. The LED is characterised by maximum long-term stability and monochromatic light emission with minimum power input. The sample chamber is fully sealed, so no water can penetrate into the electronic components. The size of the sample chamber ensures easy cleaning of the light entry surfaces. The PCcompact may be used as test equipment with software-based calibration adjustment facilities. Battery operation makes the unit suitable for both mobile use and laboratory applications.
Water Sampling and Field Analysis Set
· With the stainless steel bailer sampler water samples can be taken out of water wells at any required depth, as well as from the water out of lakes and creeks, etc.
· The samples can be used for chemical-, biological- and/or bacteriological analysis.
· Using measuring tape and a water level measuring device allows for determination of the water level in gauges or wells.
· A multimeter to measure pH, mV, EC, salinity, temperature and oxygen. The meter has a high resolution graphic screen which shows measurements, temperature and battery condition. Full guidance is given by simple instructions in the language of your choice (UK, NL, F, D).
· With the water quality test kit, field analysis of the taken samples are possible for: iron, pH 0-14, nitrate, ammonium, fluoride and sulfite. The analysis are executed with teststrips.
· The pocket EC-meter has an automatic temperature compensation and is suitable for EC-determinations in the measuring range of 10 to 1990 micros.
· In addition the field analysis set has been fitted with registration forms and clear instructions for users.
Multimeters
As 18.50, but as a result of the 4 ring EC/T electrode (standard), more accurate conductivity measurements in a wider measuring range (far beyond sea water). The 18.52 meter also measures dissolved oxygen in water with automatic air pressure and salinity compensation (standard). (18.52.SB as 18.52.SA but with necessities to also measure redox/ORP with a combination type redox electrode (for water and wetted soil). Including glass fibre brush for platinum treatment and calibration liquid. These redox necessities can equally be used with the 18.50 meter.)
Multiparameter Test Set
Complete sets with meter for measurement of pH/ORP/DO/EC/Sal/TDS/seawater specific gravity/T/Turbidity and waterdepth, with multiple sensor.
An extremely handy and field proof multiprobe meter that comes with a rugged probe that can be used either in a special low volume flow-through cell (for above-ground use at monitoring wells) or lowered from a well protected cable.
The meter does not mind getting wet or dirty as the keypad is smooth. Operation is simple: a few seconds after pushing the ‘ON’ key the meter will show all measured parameters simultaneously.