Soil Moisture Soil Sampler Probes Draw uniform samples for on-site tests or sending to a lab.
Model HC: overall length of 20.5 in (50 cm), an 18 in (46 cm) sampling tube and an 8 in (20 cm) wide handle.
• Model J: overall length of 24 in (61 cm), a 12 in (30 cm) removable sampling tube and an 8 in (20 cm) wide handle.
• Model LS: 3 ft (1 m) heavy-duty sampler with an 11 in (28 cm) sampling tube, cut-out sleeve and foot step.
Eijkelkamp Drop Hammer used to hammer the Soil Sampling Tubes into the soil.
Long guide rod provides continuous alignment while hammering and the top grip allows for pinch free hammer blows.
• Center hole is provided for "knock out" back hammering to remove the tube from the soil once it's inserted.
Eijkelkamp 02.01 Tripods is an essential part of a bailer boring set (cable tool drilling equipment).
In selecting a tripod, working height, weight, and maximum load capacity (= tensile force) are usually determinant factors. However, the range of application is of such a magnitude, that the selection of the tripod depends strongly on the kind of work that may have to be performed with the selected tripod besides the performance of soil drillings.
Eijkelkamp 15.05 Water Well Drilling Set, Square 40 mm Connection used for the construction of hand-drilled wells in harder soils with sufficient aquifer recharge, permitting small diameter wells.
The standard set (with square 40 mm connection) is equipped with a tool guide, crosspiece and kelly, handles, various extention rods, rod catchers with cleaning point, Riverside augers with side flap for unloading, chisel augers, flight augers, a stone catcher and pointed chisel, synthetic casing tubes with steel screw thread sockets, pulling cap for casing, a notched casing shoe, a casing head, casing retriever for lost casing tubes, a casing tube clamp, bailers, a sounding device with tape to measure the groundwater level, a shovel and pickaxe, various accessories and steel transport boxes.
Eijkelkamp 15.01.SA Surveying Set For Shallow Well
Eijkelkamp 15.01.SA Surveying Set For Shallow Wells is for site investigations (to find the best place for the construction of a well).
The standard set (with conical screw thread connection) include a tool guide, handle, extension rods, rod catchers, Riverside augers and augers for stony soils, a stone catcher, a pointed chisel, synthetic casing tubes with steel socket, a casing retriever, casing tube clamps, percussion drills, a set of tools, various accessories and steel transport boxes.
Eijkelkamp 04.19.SC Percussion Drilling Set For Heterogeneous Soils With RD32-Connection for drilling up to a depth of 5 m.
Complete set contains: a gasoline driven percussion hammer, various extension rods, coupling sleeves, percussion gouges (combination type) in various diameters and lengths, a core sampler for PVC sample tubes and foil liners, a mechanical rod puller, an universal casing and rod puller clamp, a rod puller extension for the extraction of the first gouge, a crow bar, accessories to empty and clean the gouge, a lifting jack with lever and chain, an utility probe for safe cable finding, stairs for use with the percussion hammer in the field, etc., and aluminium transport cases.
Standard set for drilling according to the lost-cone method.
The complete set contains: an electrical percussion hammer, an aggregate with insulation guard, striking pens, drive-cone holder for percussion casing, steel casing, pulling equipment, lost cones and various accessories. The standard set is equipped for drilling to a depth of up to 10 m.