WETEC
401 Waterloo Multilevel System thumbnail 1
401 Waterloo Multilevel System thumbnail 2
401 Waterloo Multilevel System thumbnail 3

Solinst

401 Waterloo Multilevel System


Modular multilevel groundwater monitoring for many isolated zones in a single borehole.

  • Modular casing string with 316 stainless steel ports and permanent packers
  • Standard system on 2" (50 mm) Sch. 80 PVC for 3"-4" (75-100 mm) boreholes
  • Dedicated sampling pumps and/or pressure transducers, or open tubes
  • 2 to as many as 24 monitoring zones per hole
  • Engineered seals and monitoring used to 1000 ft (300 m)
Quantity
1

Overview

The Waterloo Multilevel Groundwater Monitoring System is used to obtain groundwater samples, hydraulic head and permeability measurements from many discretely isolated zones in a single borehole. Waterloo Systems have a modular design that gives excellent site and application flexibility, allowing placement of ports and packers exactly where needed. The engineered seals and dedicated sampling and level monitoring capabilities have been used to 1000 ft (300 m). The systems can be installed in 3-4" boreholes, or larger, and options are available to suit bedrock, overburden, or a combination application.

Typical applications

  • Defining groundwater flow patterns
  • Performance monitoring of pump and treat systems
  • Identification and determination of spatial distribution of contaminants
  • Early warning system/detection of migrating contaminants
  • Salt water intrusion
  • Industrial cleanups
  • Pipeline leaks
  • Dam leakage/rehabilitation
  • Contaminant identification/cleanup
  • DNAPL & LNAPL spill sites
  • Waste disposals/landfills
  • Soil gas surveys
  • High-resolution site characterization
  • Overburden or bedrock installations, in groundwater or vadose zone

Key Features

  • Modular components (casing lengths, packers, ports, base plug and surface manifold) allow accurate placement of ports at precise monitoring zones
  • Slip-on joints with a nylon shear wire and double o-ring seal give reliable, leakproof joints that isolate the casing core from external formation waters
  • Ports are constructed from 316 stainless steel, with dual stem ports available for both sampling and hydraulic head measurements from the same port
  • Permanent Waterloo packers use a water activated expansion sleeve with a Rubber/Kevlar/Rubber sheath for a permanent seal in cored bedrock holes and cased wells
  • Dedicated sampling pumps and/or vibrating wire pressure transducers, open tubes, or a mix of open tubes and dedicated equipment
  • Customized wellhead manifolds, with a multi-purge option to purge many zones simultaneously
  • Typically installed in a day, using a 3-4 member team
  • Systems can be designed to monitor from 2 to as many as 24 zones
  • Can be installed within the drill stem or temporary casing, or within a cased and screened well using packers

Benefits

  • Detailed 3-D data: When a number of Waterloo Systems are used at a site, they allow detailed three-dimensional groundwater information to be obtained at a reasonable cost
  • Reduced project costs: Proven cost reductions for drilling and drilling waste, with fewer drilled holes and reduced site disturbance
  • Faster purging and sampling: Purge volumes are very small due to the small annular space and tubing diameters. With dedicated pumps all zones can be purged simultaneously
  • No cross-contamination: Packers and ports are installed precisely to monitor each isolated, discrete zone, eliminating cross-contamination across zones
  • Overcome long screen biases: Discrete zones avoid contaminant mixing over long screens, which masks vertical variations and dilutes true concentrations, and avoid ambient vertical flow within the well
  • Mass flux data: Transects of Multilevels across a groundwater flow path provide the best data for Mass Flux calculations
  • Reliable data: Able to accurately and repeatedly obtain pressure and groundwater chemistry data from several distinct zones in a single borehole
  • Flexible design: Each Waterloo System is customized to suit your drilling method, zones of interest, preferred monitoring methods and borehole

Specifications

MODEL 401 WATERLOO MULTILEVEL SYSTEM

 

Standard system

2" (50 mm) Sch. 80 PVC

Borehole size

3" - 4" (75 - 100 mm)
Larger boreholes: use sand and bentonite placement, or 3-4" screen and casing installed within the larger hole

Packer length

3 ft (915 mm)

Port material

316 stainless steel

Ideal depth

100 ft - 1000 ft (30 m - 300 m)

Monitoring zones per hole

2 to as many as 24

Installation

Typically completed in a day, using a 3-4 member team

 

 

NUMBER OF MONITORING ZONES - STANDARD 2" (50 MM) SYSTEM

 

Dedicated Pumps and Open Tubes

6

Dedicated Pumps and Transducers

8

Dedicated Pumps Only

12

Open Tubes Only (varies with tube size)

15

Dedicated Pressure Transducers Only

24

 

 

MONITORING OPTIONS

 

Dedicated pressure transducers

Unvented vibrating wire transducers
Pressure ranges from 50 psi to 435 psi (350 kPa to 3 MPa)

Dedicated sampling pumps

Gas drive Double Valve Pumps (stainless steel and PTFE valves) or Bladder Pumps
Dual line polyethylene or PTFE tubing connects each pump to the wellhead manifold

Micro Double Valve Pump

Coaxial PFAS-free PTFE tubing
Small enough to fit in 1/2" (13 mm) ID tubing

Water levels in open tubes

Model 102 Water Level Meter with P4 probe, 4 mm (0.157") OD x 38 mm (1.5") long

Sampling in open tubes

Mini Inertial Pump, Micro Double Valve Pump or Peristaltic Pump

Downloads

401 Waterloo Multilevel System Datasheet (EN) Download401 Waterloo Multilevel System Datasheet (EN)
401 Waterloo Multilevel Operating Instructions Download401 Waterloo Multilevel Operating Instructions