Solinst
410 Peristaltic Pumps
Reversible flow field pump for vapor sampling, groundwater sampling from shallow wells and surface water sampling.
- Variable speed, 40 mL/min to 3.2 L/min
- Suction lift as much as 10 m (33 ft) at sea level
- 12 V DC, durable, compact, lightweight and water-resistant
- Optional automatic drawdown control with the 101D Water Level DrawDown Meter
Overview
The Solinst Model 410 Peristaltic Pump is a reversible flow field pump, ideal for vapor sampling, groundwater sampling from shallow wells, or surface water sampling. It can also be used for vacuum pumping and for pressure delivery of liquids or gases. Its mechanical peristaltic operation uses rotating rollers to depress the silicone tubing, creating a vacuum that displaces any fluid or gas in the chosen direction. It is effective to depths up to the suction lift limit, which varies with elevation and can be as much as 10 m (33 ft) at sea level. The latest Mk5 version adds automatic drawdown control when connected to a Solinst 101D Water Level DrawDown Meter.
Typical applications
- Groundwater sampling from shallow wells
- Surface water sampling from lakes and streams
- Vapor sampling for environmental site assessments
- Vacuum pumping or pressure delivery of liquids and gases
- Low-flow sampling and filling of small sample bottles
- Automatic pump control based on water level drawdown, with a 101D
Key Features
- Reversible flow with variable speed, controlled by one simple, easy-access dial on top of the pump
- Sampling rates from 40 mL/min up to 3.2 L/min, depending on the tubing size
- Suction lift as much as 10 m (33 ft) at sea level
- Clear pump head for quick, easy inspection and replacement of the tubing, before and during operation
- Pump head tubing guides keep the tubing in place during sampling, with no extra tubing clamps required
- Durable, compact, lightweight and water-resistant design: rugged metal case with no vents, grates or openings
- 10 amp breaker switch, eliminating the need to replace fuses, and reverse polarity protection
- LED indicator for pump status
- Operates from 12 V DC, with a 3 m (10 ft) power cord with alligator clips
- Optional 12V Battery Holder to add a battery right to the pump assembly
- Drawdown Mode: automatically stops and restarts pumping based on the water level detected by a Solinst 101D Water Level DrawDown Meter
Benefits
- High sample integrity: The sample only comes in contact with the tubing. Replacing the tubing between locations avoids cross-contamination.
- Less decontamination: Dedicate the down-hole tubing to reduce lengthy decontamination procedures.
- Flexible sampling rates: Two sizes of silicone pump head tubing give rates from 40 mL/min, ideal for low-flow sampling and filling small sample bottles, up to 3.2 L/min.
- Easy tubing changes: The pump head cover is easy to remove for cleaning or replacing the tubing.
- Easy maintenance: No vents or grates, and no fuses to replace.
- Protects the well: In Drawdown Mode, the pump pauses once a specified drawdown level is reached and restarts only after the water level has recovered, preventing over-pumping.
- Portable power: Runs from a car, truck or marine 12 V battery, or from the optional 12V Battery Holder.
Specifications
SPECIFICATIONS |
|
Pump type | Reversible flow peristaltic pump with variable speed |
Sampling depth | As much as 10 m (33 ft) at sea level, up to the suction lift limit, which varies with elevation. Pumping rates and lift decrease with elevation and as lift increases. |
Sampling rate | 3.2 L/min with the standard 5/8" OD (16 mm) tubing |
Pump size | 33 cm x 13 cm x 17 cm (13" x 5" x 6-1/2") |
Pump weight | 3.3 kg (7.2 lbs) |
Power source | 12 volt DC, from almost any 12 V DC source that can supply at least 3 to 5 amps at maximum draw (such as an auto, marine or small gel cell battery) |
Power draw | 3 to 5 amps max. |
Power cord | 3 m (10 ft) with alligator clips |
Protection | 10 amp circuit breaker with reset button (no fuse to replace) |
Optional 12V Battery Holder | L: 14.9 cm (5.9") |
Drawdown Mode | When connected to a Solinst Model 101D Water Level DrawDown Meter with a DrawDown Link Cable, pumping stops when a specified drawdown level is reached and restarts once the water level has recovered |
Operating notes | Operate upright, sitting on the rubber feet |
TUBING AND ACCESSORIES |
|
Standard pump tubing | 5/8" OD (16 mm) medical grade silicone |
Tubing adaptor kit | 3/8" OD (10 mm) silicone tubing, for lower sampling rates |
Optional tubing weight | Stainless steel with a 50 mesh filter screen, keeps the down-hole tubing straight and sediments out |
Used with | Solinst 101D Water Level DrawDown Meter and DrawDown Link Cable |
Downloads
| 410 Peristaltic Pump Datasheet (EN) | Download410 Peristaltic Pump Datasheet (EN) |
|---|---|
| 410 Mk5 Peristaltic Pump Operating Instructions (EN) | Download410 Mk5 Peristaltic Pump Operating Instructions (EN) |
| 410 Mk4 Peristaltic Pump Operating Instructions (EN) | Download410 Mk4 Peristaltic Pump Operating Instructions (EN) |
Related Products
.jpg)
Solinst
404 Inertial Pump
Solinst 404 Inertial Pump: a simple riser tube and footvalve pump, operated by hand or surface pumping mechanism, to 200+ ft (60+ m) in 0.4" to 6" ID wells.
Learn More
Solinst
415 12V Submersible Pump
Solinst 415 12V Submersible Pump for groundwater purging and sampling from 2" wells, up to 13.5 L/min, to 36.5 m (120 ft) below ground surface.
Learn More
Solinst
408 Double Valve Pumps
Solinst 408 Double Valve Pumps: gas drive pumps for low flow or regular flow groundwater sampling, with no bladder to replace. Stainless steel or PVC.
Learn More
Solinst
3001 Levelogger 6 LTC
Level, temperature and conductivity datalogger with a Hastelloy pressure sensor, 4-electrode platinum conductivity sensor, 100,000 data sets of memory and an…
Learn More