WETEC
425 Discrete Interval Samplers thumbnail 1
425 Discrete Interval Samplers thumbnail 2

Solinst

425 Discrete Interval Samplers


Stainless steel Discrete Interval Samplers for taking zero-purge groundwater samples from a chosen depth.

  • Model 425 samples to 90 m (300 ft) below water level; Model 425-D Deep Sampling DIS typically to 1000 m (3200 ft)
  • Pressure activated with a high pressure hand pump, with a pressure/vent switch on the reel
  • Sealed when lowered and on retrieval, so water from different levels does not mix
  • Sample is not pumped through the tubing
  • Sample release device included with each standard sampler
  • Model 425 in 1", 1.66" and 2" diameters, 2 ft and 4 ft lengths
Quantity
1

Overview

The Solinst Model 425 Discrete Interval Sampler (DIS) is a stainless steel sampler with LDPE tubing mounted on a convenient Solinst reel. The reel has a pressure attachment for a high pressure hand pump, and a pressure/vent switch that applies and releases the pressure on the sampler. A sample release device is included with each standard Discrete Interval Sampler. Solinst also offers the Model 425-D Deep Sampling Discrete Interval Sampler for taking samples from submerged depths of typically up to 1000 m (3200 ft).

Typical applications

  • Obtaining a representative groundwater sample from below oil/product layers
  • Discrete interval sampling in lakes, rivers and wells
  • Chemical profiling of wells
  • Sampling at points of inflow to well
  • LNAPL and DNAPL sampling
  • Profiling open bodies of water, open boreholes and screened wells
  • Deep water sampling of boreholes, wells, lakes and oceans (425-D)
  • Applications similar to deep abandoned mine shaft monitoring (425-D)

Key Features

  • Stainless steel sampler with LDPE tubing on a convenient Solinst reel; PTFE or PTFE-lined polyethylene tubing also available
  • Reel has a pressure attachment for a high pressure hand pump and a pressure/vent switch
  • Pressurized before lowering and on retrieval, so water from different levels does not mix
  • Floating check ball inside the sampler keeps sample water out of the tubing, so the inside of the tubing does not need decontaminating
  • Sample release device regulates flow and minimizes degassing of the sample
  • Model 425 samples to 90 m (300 ft) below water level, regardless of total depth from surface
  • Model 425-D Deep Sampling DIS typically samples from submerged depths up to 1000 m (3200 ft), and connects to the same tubing reel as the standard 425
  • 425-D needs no compressor, a simple bike pump is enough
  • Cable connector at the top of the sampler for a suspension cable or Model 103 Tag Line
  • Easy disassembly for decontamination
  • Model 425 in 1", 1.66" and 2" diameters, 2 ft and 4 ft lengths; other diameters and lengths available on request

Benefits

  • High quality samples: the sample has not been pumped through tubing
  • No mixing: no mixing of water from different levels
  • Minimal disturbance: minimal disturbance of the water
  • Easy decontamination: easy disassembly for decontamination
  • No purge water: avoids purging and disposal of purge water
  • Less cost and time: less cost and time to retrieve samples
  • Easy operation: easy operation and transportation
  • No-purge sampling: recognized as a no-purge (zero-purge or passive) sampler, a method accepted by many regulatory agencies worldwide
  • VOC sampling: minimal contact with air, and the sample does not travel through a long length of tubing, which risks loss of volatile organics

Specifications

MODEL 425 DISCRETE INTERVAL SAMPLER

 

Maximum sampling depth

90 m (300 ft) below water level, regardless of total depth from surface

Operation

Pressure activated using a high pressure hand pump; the pressure/vent switch on the reel applies and releases the pressure

Construction

Stainless steel with o-rings, and PTFE and polypropylene check balls

Tubing

1/4" OD low density polyethylene (LDPE) most commonly used; PTFE or PTFE-lined polyethylene tubing also available

Sample release

Sample release device included with each standard sampler

Suspension

Cable connector at the top of the sampler, for a suspension cable or Model 103 Tag Line

Reels

Larger size reels, including Power Reels, available for longer lengths of tubing

Operating pressure

(Submerged depth in feet x 0.43) + 10 psi
(Submerged depth in meters x 9.8) + 70 kPa

 

 

RECOMMENDED OPERATING PRESSURE (425)

 

25 ft (8 m)

20 psi (148 kPa)

50 ft (15 m)

30 psi (217 kPa)

100 ft (30 m)

50 psi (364 kPa)

200 ft (60 m)

95 psi (660 kPa)

300 ft (90 m)

140 psi (952 kPa)

 

 

CAPACITY (425)

 

1" x 2 ft (25.4 mm x 610 mm)

6 oz (190 ml)

1.66" x 2 ft (42 mm x 610 mm)

18 oz (475 ml)

2" x 2 ft (50.8 mm x 610 mm)

27 oz (800 ml)

1" x 4 ft (25.4 mm x 1220 mm)

12 oz (365 ml)

1.66" x 4 ft (42 mm x 1220 mm)

32 oz (1000 ml)

2" x 4 ft (50.8 mm x 1220 mm)

61 oz (1800 ml)

Other sizes

Other diameters and lengths available on request

 

 

MODEL 425-D DEEP SAMPLING DIS

 

Typical sampling depth

Up to 1000 m (3200 ft) submerged depth; sampling to 1200 m (4000 ft) is possible, contact Solinst to determine suitability for your application

Operation

Pressure at the sampling depth acts on the top of a piston inside the sampler, overcoming the hydrostatic pressure on the bottom of the piston to let sample water in; releasing the pressure reseals the piston. Air is vented through holes covered with a Vyon filter on the side of the sampler

Construction

Stainless steel and o-rings, with a Vyon filter and Delrin plunger on the internal piston

Weights

Attach weights to the top of the sampler to overcome buoyancy before lowering
2 ft sampler: one weight every 500 m of submerged depth
4 ft sampler: one weight every 600 m of submerged depth

Capacity

1.66" x 2 ft (42 mm x 610 mm): 400 ml (14 oz)
1.66" x 4 ft (42 mm x 1220 mm): 800 ml (28 oz)

 

 

RECOMMENDED OPERATING PRESSURE AND WEIGHTS (425-D)

 

160 ft (50 m)

50 psi (345 kPa)
Weights: 0 (2 ft sampler), 0 (4 ft sampler)

320 ft (100 m)

50 psi (345 kPa)
Weights: 0 (2 ft sampler), 0 (4 ft sampler)

640 ft (200 m)

50 psi (345 kPa)
Weights: 0 (2 ft sampler), 0 (4 ft sampler)

960 ft (300 m)

75 psi (520 kPa)
Weights: 0 (2 ft sampler), 0 (4 ft sampler)

1280 ft (400 m)

100 psi (690 kPa)
Weights: 0 (2 ft sampler), 0 (4 ft sampler)

1600 ft (500 m)

125 psi (860 kPa)
Weights: 1 (2 ft sampler), 0 (4 ft sampler)

1920 ft (600 m)

150 psi (1030 kPa)
Weights: 1 (2 ft sampler), 1 (4 ft sampler)

2250 ft (700 m)

175 psi (1200 kPa)
Weights: 1 (2 ft sampler), 1 (4 ft sampler)

3250 ft (1000 m)

200 psi (1380 kPa)
Weights: 2 (2 ft sampler), 1 (4 ft sampler)

Drawing

Discrete-Interval-Sampler-Operating-Principles

Downloads

425 Discrete Interval Sampler Datasheet (EN) Download425 Discrete Interval Sampler Datasheet (EN)
425 Discrete Interval Sampler Operating Instructions - 1" dia. Download425 Discrete Interval Sampler Operating Instructions - 1" dia.
425 Discrete Interval Sampler Operating Instructions - 1.66" dia. Download425 Discrete Interval Sampler Operating Instructions - 1.66" dia.
425 Discrete Interval Sampler Operating Instructions - 2" dia. Download425 Discrete Interval Sampler Operating Instructions - 2" dia.