WETEC

Eureka

CO2 Carbon Dioxide Sensor


Dissolved carbon dioxide sensor for Solinst Eureka Manta+ water quality sondes.

  • Ranges up to 0 to 10,000 ppm, with the range custom set to maximize accuracy
  • Accuracy of ±3% of full scale, with a 5-year sensor life
  • Comes with a factory calibration
Quantity
1

Overview

The Solinst Eureka CO2 sensor combines a rugged design, ease of use and versatility in a single sensor package. A semi-permeable membrane allows gases to transfer from the water into a gas head space where the measurement is made. The result is output as a voltage from 0 to 5 volts, proportional to and representing an estimate of the amount of CO2 gas in the water sample analyzed, which the Manta+ converts to %Sat or ppm. The range can be custom set to maximize accuracy, and the sensor comes with a factory calibration.

Typical applications

  • Aquaculture: monitoring CO2, along with other water quality parameters, in open water and tanks to ensure they are within desired levels
  • Wastewater monitoring: wastewater with high organic loading can produce pCO2 upwards of around 10,000 ppm in certain holding ponds
  • Reef monitoring: monitoring reefs, and rivers and other water flows that spill into near-shore environments, to indicate expected change in a reef system
  • Carbon capture storage: monitoring aquifers, ground and surface waters to ensure CO2 remains at depth
  • Bio-fuels: in situ pCO2 measurements during pilot-scale testing of algal farms, and regulating CO2 loss once a farm is running

Key Features

  • Rugged design, ease of use and versatility in a single sensor package
  • Semi-permeable membrane transfers gas from the water into a gas head space for measurement
  • 0 to 5 volt output, converted by the Manta+ to %Sat or ppm
  • Ranges of 0 to 50 mg/l, 0 to 2,000 ppm, 0 to 5,000 ppm and 0 to 10,000 ppm, with the range custom set to maximize accuracy
  • Accuracy of ±3% of full scale, with a resolution of 0.1 ppm
  • Factory calibration, 5-year sensor life and cleaning as the only listed maintenance
  • May be installed in the Manta+ 40 along with other sensors such as dissolved oxygen, pH and conductivity

Benefits

  • Custom Range: The range on the sensor can be custom set to maximize accuracy.
  • Factory Calibration: The CO2 sensor comes with a factory calibration.
  • Flexible Installation: Although it is a large sensor, it may be installed in the Manta+ 40 with other sensors. If only CO2 is needed, it may be installed on a smaller probe.
  • Flexible Deployment: Eureka multiprobes can be configured with battery packs for autonomous self-powered deployment, used with field displays for site-to-site spot checking, or connected to data telemetry stations for real-time remote monitoring.
  • Early Warning: Systems receiving data from the Manta+ can warn aquaculture scientists of changing CO2 levels within a farm.

Specifications

SPECIFICATIONS

 

Sensor type

Carbon dioxide (CO2)

Ranges available

0 to 50 mg/l
0 to 2,000 ppm
0 to 5,000 ppm
0 to 10,000 ppm
Range can be custom set to maximize accuracy

Accuracy

±3% of full scale

Resolution

0.1 ppm

Units

ppm

Output

0 to 5 volts, proportional to and representing an estimate of the amount of CO2 gas in the water sample analyzed; the Manta+ converts the output to %Sat or ppm

Measurement method

Semi-permeable membrane allows gases to transfer from water into a gas head space where the measurement is made

Calibration

Factory calibration

Maintenance

Cleaning

Sensor life

5 years

Maximum depth

50 m

Compatibility

Large sensor; may be installed in the Manta+ 40 along with other sensors such as dissolved oxygen, pH and conductivity
If only CO2 is needed, it may be installed on a smaller probe
Not available on the Manta+ F35 or the Trimeter

Downloads

Manta+ Water Quality Probes Family Datasheet (EN) DownloadManta+ Water Quality Probes Family Datasheet (EN)