

Senseca
LPPIRG01 Pyrgeometer
Pyrgeometer for far infrared radiation measurement and energy balance studies.
Thermopile sensor with −300…+300 W/m² measuring range
Spectral range 5.5…45 µm (50%) and 160° viewing angle
Passive mV output (LPPIRG01) or RS485 Modbus-RTU output (LPPIRG01S)
IP67-rated housing with anodized aluminium body, ASA shield and silicon window
Overview
The Senseca LPPIRG01 / LPPIRG01S pyrgeometer measures far infrared radiation at wavelengths greater than 4.5 µm for atmospheric radiation monitoring and energy balance studies. It uses a blackened thermopile sensor and an integrated NTC temperature sensor to determine infrared irradiance. The instrument provides a measuring range of −300…+300 W/m², a spectral range of 5.5…45 µm (50%) and a 160° viewing angle.
The LPPIRG01 features a passive mV output without requiring an external power supply, while the LPPIRG01S provides RS485 Modbus-RTU communication and operates on 5…30 Vdc. Both models feature IP67-rated protection, an anodized aluminium housing, an ASA radiation protection shield and a silicon window with a scratch-resistant DLC coating. An integrated bubble level assists horizontal positioning, while a silica-gel cartridge helps prevent internal condensation. Each instrument is factory calibrated outdoors against a reference pyrgeometer calibrated at the World Radiation Center (WRC) and supplied with a calibration report.
Typical Applications
Far infrared radiation measurement for atmospheric studies
Downward and upward long-wave radiation monitoring
Energy balance studies using pyrgeometers and an albedometer
Infrared irradiance data acquisition using data loggers
Key Features
Blackened thermopile sensor for far infrared radiation measurement
Integrated NTC sensor for instrument temperature measurement
Measuring range −300…+300 W/m²
Spectral range 5.5…45 µm (50% transmission)
160° viewing angle
Typical sensitivity 5…10 µV/(W/m²)
Passive mV output without external power supply (LPPIRG01)
RS485 Modbus-RTU output with 5…30 Vdc power supply (LPPIRG01S)
IP67 protection with anodized aluminium housing and ASA solar radiation protection screen
Silicon window with scratch-resistant DLC coating
Integrated bubble level with accuracy better than 0.1°
Silica-gel cartridge to absorb internal moisture and help prevent condensation
Operating temperature −40…+80 °C
Factory calibrated outdoors against a reference pyrgeometer calibrated at the World Radiation Center (WRC), with calibration report supplied
Benefits
Supports far infrared radiation monitoring and energy balance studies
Passive mV (LPPIRG01) or RS485 Modbus-RTU (LPPIRG01S) outputs to suit different monitoring systems
Passive model requires no external power supply
IP67 protection and weather-resistant construction support outdoor installations
DLC-coated silicon window reduces the risk of scratching during cleaning
Silica-gel cartridge absorbs internal moisture to help prevent condensation on the silicon window
Integrated bubble level assists precise horizontal positioning
Factory calibrated outdoors against a reference pyrgeometer calibrated at the World Radiation Center (WRC), with calibration report supplied
Specifications
Measurement | |
|---|---|
Sensor | Thermopile |
Measuring range | −300…+300 W/m² |
Spectral range (50%) | 5.5…45 µm |
Viewing angle | 160° |
Typical sensitivity | 5…10 µV/(W/m²) |
Impedance | 33…45 Ω |
Performance According to ISO 9060:2018 | |
|---|---|
Response time (95%) | <28 s |
Zero offset (Type B): response to a 5 K/h change in ambient temperature | <4 W/m² (absolute magnitude) |
Long-term instability (1 year) | <1.5% (absolute magnitude) |
Non-linearity | <1% (absolute magnitude) |
Spectral selectivity | <5% (absolute magnitude) |
Temperature response | <3% |
Tilt response | <2% (absolute magnitude) |
Electrical | LPPIRG01 | LPPIRG01S |
|---|---|---|
Output | Passive mV | RS485 Modbus-RTU |
Power supply | No power required | 5…30 Vdc |
Current consumption | Not specified | 2 mA @ 24 Vdc |
Electrical Connection | |
|---|---|
Connection | 8-pole M12 connector |
Environmental | |
|---|---|
Operating temperature | −40…+80 °C |
Operating relative humidity | 0…100% RH |
Maximum operating altitude | 6000 m |
Protection degree | IP67 |
Mechanical | |
|---|---|
Housing material | Anodized aluminium |
Screen material | ASA |
Sensitive area window material | Silicon |
Weight | Approximately 0.9 kg |
Bubble level accuracy | <0.1° |
Reliability | |
|---|---|
Mean time between failures (MTBF) | >10 years |
RS485 Modbus-RTU Communication – LPPIRG01S Only | |
|---|---|
Communication protocol | Modbus-RTU |
Communication interface | RS485 |
Modbus address range | 1…247 |
Default Modbus address | 1 |
Supported baud rates | 9600, 19200, 38400, 57600, 115200 bps |
Default baud rate | 19200 bps |
Data bits | 8 |
Supported communication formats | 8N1, 8N2, 8E1, 8E2, 8O1, 8O2 |
Default communication format | 8E1 |
RS485 output isolation | Not isolated |
Calibration | |
|---|---|
Calibration | Factory calibrated |
Calibration method | Outdoor comparison with a reference pyrgeometer |
Reference instrument | Pyrgeometer calibrated at the World Radiation Center (WRC) |
Calibration conditions | Instruments kept outdoors for at least one night under clear skies |
Calibration documentation | Calibration report supplied |
Drawing
Downloads
| LPPIRG01 Family Datasheet | DownloadLPPIRG01 Family Datasheet |
|---|---|
| LPPIRG01 Family User Manual | DownloadLPPIRG01 Family User Manual |
| LPPIRG01 Family CE Declaration of Conformity | DownloadLPPIRG01 Family CE Declaration of Conformity |
Related Products
Senseca
LPSILICON-PYRA04 Silicon Pyranometer
Silicon pyranometer for global solar irradiance measurement in solar thermal and PV applications.
Learn More
Senseca
LPS13 Class A Pyranometer with Shadow Ring
Spectrally Flat Class A pyranometer with adjustable shadow ring for diffuse solar irradiance measurement.
Learn More
Senseca
LPS12 Class B pyranometer with Shadow Ring
Spectrally Flat Class B pyranometer with adjustable shadow ring for diffuse solar irradiance measurement.
Learn More
Senseca
LPS02 Class B Pyranometer
Spectrally Flat Class B pyranometer for global solar irradiance monitoring.
Learn More