Senseca
LPSILICON-PYRA04 Silicon Pyranometer
Silicon photodiode pyranometer for global solar irradiance measurement in solar thermal and photovoltaic applications.
Measuring range 0…2000 W/m² and spectral range 400…1100 nm
Typical sensitivity 20 µV/(W/m²) and response time <0.5 s
Passive mV output with no external power supply required
180° viewing angle according to the cosine law
5 m fixed cable with open wires
IP67 anodized aluminium housing, operating temperature −40…+70 °C
Optional base with bubble level (LPSILICON-PYRA04BL) for horizontal positioning
Overview
The Senseca LPSILICON-PYRA04 is a silicon photodiode pyranometer designed to measure global solar irradiance on a flat surface, combining direct and diffuse solar irradiance. It is suitable for natural sunlight measurement in solar thermal and photovoltaic applications, covering a measuring range of 0…2000 W/m² and a spectral range of 400…1100 nm.
The sensor features a typical sensitivity of 20 µV/(W/m²) and a response time below 0.5 s. Its special geometry and diffuser provide a 180° viewing angle according to the cosine law. The pyranometer delivers a passive mV output without requiring an external power supply and connects through a 5 m fixed cable with open wires.
Each pyranometer is factory calibrated against a Class B reference pyranometer using a solar simulator reproducing the A.M. 1.5 solar spectrum. The instrument features an IP67 anodized aluminium housing and operates from −40…+70 °C. An optional version, LPSILICON-PYRA04BL, includes a base with bubble level for accurate horizontal positioning.
Typical Applications
Global solar irradiance measurement under natural sunlight
Solar thermal energy monitoring
Solar photovoltaic (PV) system monitoring
Key Features
Silicon photodiode sensor for global solar irradiance measurement
Measuring range 0…2000 W/m²
Spectral range 400…1100 nm
Typical sensitivity 20 µV/(W/m²)
Response time below 0.5 s
180° viewing angle according to the cosine law
Passive mV output with no external power supply required
5 m fixed cable with open wires
IP67 anodized aluminium housing
Operating temperature −40…+70 °C
Factory calibrated by comparison with a Class B reference pyranometer using a solar simulator reproducing the A.M. 1.5 solar spectrum
Optional base with bubble level (LPSILICON-PYRA04BL) for horizontal positioning
Benefits
Global solar irradiance measurement for solar thermal and photovoltaic monitoring
Fast response below 0.5 s for rapid irradiance measurements
No external power supply required for passive operation
Simple connection through a 5 m fixed cable with open wires
Suitable for long-term outdoor use with IP67 anodized aluminium housing
Factory calibrated for solar irradiance measurement
Optional bubble-level base for easier horizontal positioning (LPSILICON-PYRA04BL)
Specifications
Sensor and Measurement | |
|---|---|
Sensor | Silicon photodiode |
Measured quantity | Global solar irradiance (direct and diffuse irradiance) |
Measuring range | 0…2000 W/m² |
Spectral range | 400…1100 nm |
Typical sensitivity | 20 µV/(W/m²) |
Response time | <0.5 s |
Viewing angle | 180° according to the cosine law |
Measurement Performance | |
|---|---|
Non-linearity | < |±2| % |
Long-term instability (1 year) | < |±2| % |
Temperature response (−10…+40 °C) | < |±3| % |
Calibration uncertainty | < |±3| % |
Spectral error | < |±4| % |
Directional response at 1000 W/m² | < |±30| W/m² |
Electrical | |
|---|---|
Output | Passive in mV |
Power supply | No power required |
Output impedance | <50 Ω typical (operating manual) |
Connection | 5 m fixed cable with open wires |
Environmental and Mechanical | |
|---|---|
Operating temperature | −40…+70 °C |
Protection degree | IP67 |
Housing material | Anodized aluminium |
Calibration | |
|---|---|
Calibration | Factory calibrated |
Calibration method | Comparison with a Class B reference pyranometer |
Calibration equipment | Solar simulator with filters reproducing the solar spectrum |
Calibration spectrum | A.M. 1.5 (air mass index 1.5) |
Electrical Connections | |
|---|---|
White / Red | +Vout |
Blue / Brown | −Vout |
Black | Cable shield |
Model Variants | |
|---|---|
LPSILICON-PYRA04 | Pyranometer without base with bubble level |
LPSILICON-PYRA04BL | Pyranometer supplied with base with bubble level |
Drawing
Downloads
| LPSILICON-PYRA04 Family Datasheet | DownloadLPSILICON-PYRA04 Family Datasheet |
|---|---|
| LPSILICON-PYRA04 Family User Manual | DownloadLPSILICON-PYRA04 Family User Manual |
Related Products

Senseca
LPPIRG01 Pyrgeometer
Pyrgeometer for far infrared radiation measurement and energy balance studies.
Learn More
Senseca
LPS13 Class A Pyranometer with Shadow Ring
Spectrally Flat Class A pyranometer with adjustable shadow ring for diffuse solar irradiance measurement.
Learn More
Senseca
LPS12 Class B pyranometer with Shadow Ring
Spectrally Flat Class B pyranometer with adjustable shadow ring for diffuse solar irradiance measurement.
Learn More
Senseca
LPS02 Class B Pyranometer
Spectrally Flat Class B pyranometer for global solar irradiance monitoring.
Learn More