Eureka
PTSA Fluorescence Sensors
Fluorometric UV sensors for measuring PTSA dye in water tracing and water treatment applications.
- Range: 0 to 650 ppb
- Resolution 0.01, linearity of 0.99 R²
- Sensor life of 5+ years
- Installs in Manta+ multiprobes or stand-alone on the Trimeter
Overview
Solinst Eureka PTSA Fluorescence Sensors are fluorometric sensors for water quality sondes, used to measure PTSA (Pyrenetetrasulfonic acid) dye. PTSA dye is non-toxic and chemically stable, making it a trace additive for water treatment systems and agricultural applications, and it can also be added to water systems to provide water discharge and velocity data. This UV optical sensor detects the fluorescence of PTSA in water up to 650 ppb. PTSA dye emits wavelengths between 400 and 500 nm when irradiated with UV light. It can be installed in Manta+ multiprobes alongside other sensors, or stand-alone on the Trimeter.
Typical applications
- Trace additive for water treatment systems
- Trace additive for agricultural applications
- Real-time product dose analysis, feed rate monitoring and continuous system monitoring
- Providing water discharge and velocity data with dye tracing studies
- Studying and modeling surface and groundwater systems
- Measuring water flows
- Tracing contaminants in emergency response situations
- Detecting leaks
- Measuring tank retention times
Key Features
- Fluorometric UV optical sensor: detects the fluorescence of PTSA in water
- Range: 0 to 650 ppb
- Resolution 0.01, linearity of 0.99 R², units in ppb
- PTSA emits wavelengths between 400 and 500 nm when irradiated with UV light
- Calibration with a lab-qualified sample
- Maintenance: cleaning and calibration
- Sensor life of 5+ years
- Installs in Manta+ multiprobes alongside other sensors such as additional fluorometers, turbidity, dissolved oxygen, pH and conductivity, or stand-alone on the Trimeter
- Controlled by the Manta Control software, like other installed sensors
- Anti-fouling options: universal wiper system and copper mesh sensor guard
- Probes can be configured with battery packs for autonomous self-powered deployment, used with field displays for site-to-site spot checking, or connected to data telemetry stations for real-time remote monitoring
Benefits
- Non-toxic and stable: PTSA dye is non-toxic and chemically stable.
- Linear response: When PTSA is added to treatment formulations, the fluorescent response of the tracer dye is proportional and graphically linear, between specific concentration ranges, to the concentration of the chemical with which the system is dosed.
- Real-time dose analysis: Measurements from the PTSA fluorometer may be made available online, in the field and in the laboratory, enabling real time product dose analysis and improved accuracy of feed rate monitoring.
- Easy to handle: PTSA is safe to handle, easy to dilute (specific gravity is 1.0), non-toxic, non-flammable and not reactive with other compounds.
- Lab standard: PTSA can be used to standardize fluorometers configured for detection of CDOM/FDOM, crude oil, optical brighteners and PTSA, and all of Eureka's UV optical sensors or fluorometers.
- Comparable readings: Standardized UV sensors from the same or different manufacturers can use PTSA so values are reported as a standard unit of measure, making it easier to compare instrumentation deployed at long distances from each other.
- Ultra-low concentrations: Fluorometers allow researchers to measure ultra-low concentrations of dye.
- No dedicated fluorometer needed: The sensor can be installed in a Manta+ probe along with other sensors.
- Easy operation: The sensor is controlled by the Manta Control software, like other installed sensors.
- Long sensor life: Typical sensor life is 5+ years.
Specifications
SPECIFICATIONS |
|
Sensor type | Fluorescence |
Excitation and emission | UV excitation |
Range | 0 to 650 ppb |
Resolution | 0.01 |
Accuracy | Linearity of 0.99 R² |
Units | ppb |
Calibration | Lab-qualified sample |
Maintenance | Cleaning and calibration |
Sensor life | 5+ years |
Anti-fouling options | Universal wiper system, copper mesh sensor guard |
Compatible probes | Manta+ multiprobes, alongside other sensors such as additional fluorometers, turbidity, dissolved oxygen, pH and conductivity |
Caution | Never look directly at a fluorometer sensor. The UV rays emitted by the sensor can cause eye damage. |
Downloads
| Fluorometers Family Datasheet (EN) | DownloadFluorometers Family Datasheet (EN) |
|---|
Related Products

Eureka
Crude Oil Sensors
Fluorometric crude oil sensors for water quality monitoring, 0 to 300 ppb, for Eureka Manta+ multiprobes and the Trimeter.
Learn More
Eureka
Refined Oil and Fuel Sensors
Fluorometric refined oil and fuel sensors for in situ detection of BTEX VOCs, 0 to 20 ppm, for Eureka Manta+ multiprobes and the Trimeter.
Learn More
Eureka
Fluorescein Sensors
Fluorometric fluorescein dye sensors for water tracing and dye trace studies, 0 to 150 ppb, for Eureka Manta+ multiprobes and the Trimeter.
Learn More
Eureka
Rhodamine Sensors
Fluorometric rhodamine dye sensors for tracer studies and discharge and velocity data, 0 to 200 ppb, for Eureka Manta+ multiprobes and the Trimeter.
Learn More