Eijkelkamp
14.27 Soil Moisture Measuring System Watermark
Soil & CropsSoil Moisture Measuremnt
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are possible.
Quantity
1
Benefits
- Cheap but serious measuring instrument
- Results directly expressed as soil suction
- Range allows measuring trees and dry crops
- Also good for irrigation advice
- No field maintenance of probes
- Stable long lasting salinity insensitive probes
- Easy read-out with simple cheap instrument
- Temperature can be corrected
- Cheap simple 8 ports datalogger available
Specifications
| Maximum measuring depth | > 100 cm |
|---|---|
| Measuring range | 0...2000 hPa |
| Registration type | logging |
| Measuring accuracy | ± 5% |
| Reading accuracy | 0.5% |
| Volume of material needed | 30 ml |
Downloads
| doc_1520_181004023634 | Downloaddoc_1520_181004023634 |
|---|
Related Products

Eijkelkamp
08.01 Sandbox For pF-Determination
The standard set for pF-determination pF 0 - 2.0 (0 - 0.1 bar) consists of the sandbox with control panel, suction levelling stand, water supply bottle with…
Learn More
Eijkelkamp
14.04.04 Jetfill Tensiometers
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism.
Learn More
Eijkelkamp
14.04.05 Quickdraw Tensiometers
The 14.04.05 quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil.
Learn More.jpg)
Eijkelkamp
14.04.09 Tensior 4 with electronic pressure transducer
The Tensior 4 the transducer is located at the bottom end of the tensiometer tube allowing it to be used also in case of frost (frost not too deep into the…
Learn More