

Solinst
102 Laser Marked Water Level Meter
Water level meter with a narrow laser-marked coaxial cable and a choice of two small diameter probes.
- P4 probe (4 mm) for very narrow diameters, or P10 probe (10 mm) with flexible segmented weights
- Polyurethane-jacketed cable laser marked every millimetre or 1/100 ft, in lengths from 30 m to 300 m (100 ft to 1000 ft)
- Light and audible buzzer with an adjustable sensitivity control
Overview
The Solinst Model 102 Laser Marked Water Level Meter is designed to measure groundwater levels, especially in small diameter tubes and piezometers, or where a flexible assembly is needed to get past down hole instrumentation. It uses a choice of two small diameter probes attached to a narrow coaxial cable, fitted on a sturdy reel and powered by a standard 9 volt battery. When the probe enters water, a light and buzzer activate, and the water level is read directly from the cable at the top of the well casing or borehole.
Typical applications
- Measuring groundwater levels in small diameter tubes and piezometers
- Water level measurement where a flexible assembly is needed to get past down hole instrumentation
- Water level measurement in monitoring wells (P10 probe)
- Shallow applications and very narrow diameters, including the channels of the Solinst CMT System, Drive-Point Piezometers and narrow open tubes (P4 probe)
Key Features
- Choice of two narrow stainless steel probes: P4 (4 mm) or P10 (10 mm)
- P10 probe with 10 stainless steel weights in a flexible assembly that allows easy well access and keeps the cable hanging straight
- Recessed probe tips minimize false signals in cascading water
- Coaxial cable with a durable polyurethane jacket and permanent laser markings every millimetre or 1/100 ft
- Braided copper outer conductor for flexibility and stranded stainless steel central conductor for strength
- Cable is easy to repair and splice
- Sensitivity control allows the buzzer to be scaled back or turned off in cascading water and ensures a clear signal in high and low conductivity conditions
- Standard reel with battery drawer, brake, carrying handle, battery test button and tape guide
- Replacement probes, cables and parts available
Benefits
- Narrow: The 4 mm (0.157") diameter P4 probe reaches very narrow tubes and channels.
- Long Life: Rugged, corrosion resistant components and a strong, flexible cable that is easily spliced.
- Accurate: Precise markings every mm or 1/100 ft, traceable to national standards.
Specifications
MEASUREMENT |
|
Measures | Depth to water |
Marking resolution | Every millimetre or every 1/100 ft |
Accuracy | Markings traceable to national standards |
Zero measurement point | Near the tip of both P4 and P10 probes |
Indication | Light and audible buzzer |
Conductivity detection threshold | P10: 40 µS/cm |
PROBES |
|
P10 probe | 10 mm dia. x 70 mm long (3/8" x 2.75"), stainless steel with 10 stainless steel weights; 174 g (6.14 oz) |
P4 probe | 4 mm dia. x 38 mm long (0.157" x 1.5"), stainless steel, no weights; 10 g (0.35 oz) |
Wetted materials (cable/probe) | Polyurethane, stainless steel, Delrin®, Viton®, Polyolefin (P10 only) |
CABLE |
|
Cable | Coaxial cable with polyurethane jacket, laser marked every millimetre or 1/100 ft |
Conductors | Braided copper outer conductor; stranded stainless steel central conductor |
Cable lengths | 30 m to 300 m (100 ft to 1000 ft) |
REEL AND POWER |
|
Reel IP rating | IP64 (dust and splash proof) |
Operating temperature of reel | -20 °C to +50 °C |
Operating temperature of cable/probe | -20 °C to +80 °C |
Power | 9 V alkaline battery |
Controls | On/off sensitivity switch, light, buzzer, battery test button, brake |
Tape guide | Provided with each standard reel; fits well casing 2" diameter or larger; measuring point offset 6 cm (2/10 ft) |
STANDARD CABLE LENGTHS |
|
Small reel | 30 m / 100 ft* |
Note | * Cables with P4 probes are only available in these lengths |
OPTIONS |
|
Power Winder | Attaches to small reel frames; uses a standard power drill |
Carrying bag | Optional small padded nylon carrying bag |
Replacement parts | Replacement cables with probes, weights and other spare parts |
Drawing

Downloads
| 102 Laser Marked Water Level Meter Datasheet (EN) | Download102 Laser Marked Water Level Meter Datasheet (EN) |
|---|---|
| 102 Laser Marked Water Level Meter User Manual (EN) | Download102 Laser Marked Water Level Meter User Manual (EN) |
Related Products

Solinst
104 Sonic Water Level Meter
Handheld acoustic water level meter that measures depth to static water level down to 600 m (2000 ft) in wells and closed pipes, without lowering anything…
Learn More
Solinst
101D Water Level DrawDown Meter
Water level meter with a one-toggle drawdown mode, laser-marked flat tape and a P7 probe, for measuring depth to water and monitoring drawdown during pumping…
Learn More
Solinst
101M Mini Water Level Meter
Compact, lightweight water level meter with a slim 10 mm weighted P10 probe and narrow laser-marked polyethylene tape, for measuring depth to water in narrow…
Learn More